Front Bumper LR064628

Aori Auto Parts is a professional manufacturer of Land Rover parts. Our product range includes the Front Bumper LR064628, which is developed based on original Land Rover specifications; it offers excellent impact resistance, weather resistance, and durability, and is ready for custom repainting upon receipt. Orders start at a minimum of one unit and come with a 6-month warranty. Please feel free to contact us.

Product Specifications

Core Configuration

1. Compatible Vehicle Models

Applicable Models: Range Rover Vogue (L405)

Model Years: 2013–2017

Trim Levels: Compatible with Base, HSE, Supercharged, Autobiography, and other configurations.

2. Key Features and Mounting Points

Fog Lamp Holes: Includes mounting points for standard fog lamps and fog lamp grilles on both sides.

Park Assist Holes: Pre-drilled for 4 or 6 parking sensor units.

Front Camera Holes: Pre-drilled for 2 front-facing cameras (Surround View Camera); compatible with the factory 360-degree camera system.

Headlamp Washer Holes: Pre-drilled for factory high-pressure headlamp washer nozzles.

3. Material and Manufacturing Standards

Material Specifications: 100% New PP + EPDM-TD20

Surface Finish: The bumper surface (Part No. LR064628) is sanded smooth and primed for excellent paint adhesion, allowing for direct application of the vehicle's body-color paint.

Manufacturing Process: High-precision injection molding based on 1:1 OEM data; features precise mounting tabs and screw points for seamless alignment with the vehicle chassis and easy installation.

Installation Guide

1. Pre-installation Checks

Before installing Front Bumper LR064628, verify that the OEM part number matches and confirm the vehicle model and year of manufacture.

Inspect the condition of the original bumper accessories and check the front body brackets for deformation.

If the vehicle has been involved in a collision, ensure the front structural framework, brackets, and mounting points have been properly restored.

Confirm that all mounting clips, screws, and other fasteners are present and complete.

2. Installation Procedure

Step 1: Removing the Old Front Bumper

1. Turn off the vehicle's power before starting removal. Disconnect relevant wiring harnesses and mark the locations of connectors for sensors, lights, etc.

2. Remove the bumper fasteners; avoid using excessive force when pulling to prevent damage to the body mounting brackets.

3. After removing the old bumper, detach the various accessories as required. Accessories in good condition can be reused, while damaged ones should be replaced.

Step 2: Installing Front Bumper LR064628

1. Perform a trial fit before final securing to ensure all positions align correctly.

2. Secure the bumper following the vehicle's original structure: first the center section, then the fender connection points, and finally the bottom mounting points. Do not force or stretch the bumper; tighten screws gradually to avoid deformation caused by localized stress.

3. Reinstall the original accessories onto the new bumper.

3. Post-installation Checks

Step 1: Checking Exterior Gaps and Alignment

After installation, check that the gaps between the bumper and fenders are uniform, the bumper is flush with the headlight edges, the front grille is centered, and the heights on the left and right sides are consistent.

Step 2: Checking Functional Components

Test the parking sensors for proper operation, verify that the fog lights turn on correctly, and check for any fault warnings related to the sensors.

Step 3: Road Test Confirmation

After installation, perform a brief road test to check for unusual noises and ensure the bumper is securely fastened without loosening or vibrating.

Common Installation Issues and Solutions

Packaging and Shipping

I. Product Packaging

Based on the dimensions and structural characteristics of the Front Bumper LR064628, Aori Auto Parts employs a multi-layer packaging approach:

Surface: Covered with a protective film to prevent scratches caused by friction during transit.

Corners: Reinforced with cushioning protection to minimize the risk of impact damage.

Interior: Soft protective materials to secure the product in place.

Exterior: Reinforced packaging to prevent damage from crushing or compression during transport.

Depending on order volume, we offer options for individual unit packaging or bulk packaging, with customizable outer packaging available.

II. Shipping Recommendations

We support various international shipping methods:

1. Sea Freight: Recommended for bulk purchases; offers lower per-unit shipping costs and supports both Full Container Load (FCL) and Less than Container Load (LCL) shipments.

2. Air Freight: Recommended for urgent repair orders, small-batch restocking, or sample verification.

3. International Express: Suitable only for sending samples and small-batch test orders.

FAQ

Q: Does this front bumper include the internal steel impact beam?

A: No, it does not. Part number LR064628 refers to the outer bumper cover. Internal passive safety components, such as the metal impact beam and energy-absorbing crash boxes, are typically not damaged in minor collisions and do not require replacement.

If you need the internal impact beam or energy-absorbing foam, please feel free to contact our sales team; we offer these matching components as well.

Q: What should I do if a radar fault warning appears on the dashboard after installing the new bumper?

A: This usually occurs because the new bumper alters the physical position of the radar sensors, requiring the ADAS system to recalibrate (re-learn) the data.

After replacing the bumper, we recommend visiting a professional auto repair shop to have the front radar and cameras angle-calibrated using specialized diagnostic equipment to restore normal functionality.

Q: Are the bumpers for the L405 and L322 interchangeable?

A: No, they are not interchangeable. The L322 (2002–2012 models) and L405 (2012–present) are built on completely different platforms, with distinct body structures and mounting points.

Part LR064628 is designed specifically for the L405 and cannot be installed on the L322 or other vehicle models.