Front Fog Lamp LR098340 LR098343

The Front Fog Lamp LR098340 LR098343 is manufactured by Aori Auto Parts, a specialized Chinese manufacturer. We also offer a wide range of other Land Rover parts that can be purchased together to facilitate repairs, upgrades, or inventory stocking. The product features a high-transparency, impact-resistant PC lens designed to withstand flying debris, while the rear housing is made of waterproof and dustproof ABS plastic and includes an OEM-grade sealing gasket.

Product Advantages

1. 1:1 OEM-Spec Molding

Aori Auto Parts utilizes 3D scanning and modeling based on original Land Rover data. The screw mounting points and clips align perfectly (100% match) with the vehicle's original front bumper, allowing for quick, non-destructive installation.

2. High-Transparency, Impact-Resistant Lens

The lens of the Front Fog Lamp LR098340 LR098343 is crafted from high-quality polycarbonate (PC). It offers high impact resistance, protecting the light surface from damage caused by road debris or flying stones during daily driving. A UV-protective coating is applied to the surface to prevent yellowing, cracking, or fogging caused by prolonged sun exposure.

3. High-Brightness LED Light Source

Equipped with high-performance LED chips, the fog light delivers uniform illumination and a focused beam with strong penetration. It provides effective low-level side lighting, significantly enhancing driving safety.

4. IP65+ Waterproof and Dustproof Rating

The lamp housing is assembled using ultrasonic seamless welding technology combined with temperature-resistant sealing gaskets, achieving an IP65 rating (or higher upon customization) for water and dust resistance.

5. Surface Finish and Versatile Styling

The exterior features a multi-layer plating process that is corrosion-resistant, scratch-resistant, and durable against fading or peeling. Options include the original chrome-silver finish or a fully blacked-out style.

Product Specifications

LED Fog Lights vs. Traditional Halogen Fog Lights

How to Maintain Front Fog Lamp LR098340 LR098343?

1. Regular Inspection

Inspection frequency: It is recommended to inspect at least once a month.

Inspection items:

Appearance: Check the lens for cracks, damage, or looseness.

Function: Turn on the fog lights and check if the brightness is normal. Check for persistent condensation or accumulated water inside the lens. Slight misting that clears up within a few minutes of turning on the lights is normal; however, if it persists, the seal may be compromised.

2. Proper Cleaning

Cleaning frequency: It is recommended to clean approximately every two weeks.

Cleaning method: Gently wipe the lens surface with a soft cloth dampened with clean water; take care to prevent water from entering the light unit. For stubborn stains, use a mild, specialized cleaner, but avoid using highly alkaline or abrasive cleaning agents.

Aori Auto Parts Quality Control Standards

Established in 2010, Aori Auto Parts has achieved full IATF 16949 quality management system certification and successfully obtained E-Mark certification. Our Front Fog Lamp LR098340 LR098343 comply with road safety regulations in European, American, and Middle Eastern markets.

We are committed to maintaining consistent quality; every fog lamp undergoes the following four quality inspections:

1. IP65, Airtightness, and Waterproof Testing: Each unit undergoes high-pressure airtightness testing prior to shipment to ensure no air or water leakage.

2. High-Temperature and High-Humidity Aging Test: The LED light source undergoes prolonged continuous operation testing to prevent premature degradation.

3. 1:1 OEM Fixture Alignment: The fog lamp and bezel are placed in a dedicated OEM front bumper fixture to fully inspect clip elasticity, screw hole spacing, and edge tolerances.

4. Optical Output and Cut-off Line Test: We evaluate the LED fog lamp's light pattern, road illumination uniformity, and beam cut-off line to ensure the light is non-glaring and meets penetration standards.

FAQ

Q: What is the difference between front fog lamps LR098340 and LR098343?

A: LR098340 and LR098343 are specific part numbers for the front fog lamps located on the left and right sides of the vehicle, respectively.

When purchasing, please verify the side (left or right), the corresponding OEM part number, the vehicle model year, and the specific vehicle configuration to avoid installation issues caused by incorrect part selection.

Q: Why doesn't the new front fog lamp light up after installation?

A: Potential causes include power circuit issues, an improperly seated connector, a blown fuse, an incompatible lamp model, or a fault in the vehicle's control module. We recommend checking the vehicle's wiring and connectors first, then verifying the lamp model.

Q: How do I confirm if this pair of fog lamps is suitable for my vehicle?

A: You can easily verify this in three steps:

1. Confirm the vehicle model: Must be a Land Rover Range Rover (L405) or Range Rover Sport (L494).

2. Confirm the model year: Range Rover (2018–2021) or Range Rover Sport (2018–2022).

3. Provide the VIN: Share your VIN with us for precise compatibility verification.